Understanding UL 94
Certifications and Limitations

We frequently receive inquiries from code officials about materials with UL 94 flammability ratings.The nature of the questions vary, but in general they involve whether a product or material with a UL 94 rating such as HB or V-0 is suitable for use in a model code application.

Let’s shed some light on what the UL 94 Standard and its associated flammability
ratings are and, more importantly, what they are not.

Model building, life safety and fire codes include numerous requirements that products
and materials include specified minimum flammability ratings. Among other things,
this includes tests to determine the following:

• Hourly fire resistance ratings.
• Surface burning characteristics of interior finish materials
(flame spread and smoke developed).
• Roof covering flammability ratings.
• Flammability of contents within the building
(such as mattresses, furniture, fabrics or floor coverings).
• Stored commodity classification.

Although the test methods and desired fire performance vary between tests, they have
a common underlying principal behind them, namely that (1) a relatively large amount
of the material is likely to be present, (2) the ignition source for the material may consist
of a fairly substantial open flame or radiant energy source and (3) the tests are primarily
based on the end-use of the product. Accordingly the fire tests specified in the model
codes often are referred to as medium-scale or large-scale fire tests.

UL 94, the Standard for Tests for Flammability of Plastic Materials for Parts in Devices
and Appliances includes small scale tests that evaluate the flammability of polymeric
(plastic) materials, used for parts in devices and appliances, in response to a small,
open flame or radiant heat source under controlled laboratory conditions. The scope
of UL 94 clearly indicates that it does not cover polymeric materials used for building
construction, finishing or contents such as wall and floor coverings, furnishings or
decorative objects. The results of most UL 94 flammability tests are not applicable to
materials whose thickness exceeds 13.0 mm, or whose surface area exceeds 1m2.
The UL 94 Standard provides a method for rating the ignition characteristics of plastic
materials. Two UL 94 ratings that code officials commonly run across are HB and V (V-0,
V-1, or V-2). These ratings are established using small-scale tests in which approximately
5 by ½ inch samples are subject to a ¾ inch, 50W tirrel burner flame ignition source. To
achieve a HB rating, test samples, placed horizontally, burn slowly across the sample

We frequently receive inquiries from code officials about materials with UL 94 flammability ratings.
The nature of the questions vary, but in general they involve whether a product or material with a
UL 94 rating such as HB or V-0 is suitable for use in a model code application.
1 For more information visit ul.com
when the test flame is applied to the end of the sample. To achieve a V rating (e.g. V-2,
V-1, or V-0) the test samples, placed vertically with the test flame impinging on the
bottom of the sample, must extinguish within specified times, not burning to the top
clamp or dripping molten material which ignites a cotton indicator.

UL has tested literally thousands of materials for UL 94 ratings, which are widely
published in manufacturers’ literature. The customers for these materials are primarily
the end-use manufacturers of electrical equipment and products that are required to
use UL 94 rated materials in their factory production.

However, building owners, architects or contractors sometimes run across UL 94 rated
materials that they think might be used in a model code application, and submit them
for AHJ approval. However, as mentioned, model codes do not recognize the small-scale
UL 94 fire ratings, and there is no technical basis for accepting a UL 94 rating in lieu of
other ratings specified in the Codes.

Credit : Understanding UL 94 Certifications and Limitations

 

UP NEXT

Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat. Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore.

SILENT SHIELD UNDERLAY – TIMBER FLOOR PROTECTION

  Silent Shield Acoustic Underlay from Australia can protect the timber floor and reduce the impact/drum sound. This is the high-end product line possessing the preeminent properties of #SoftlonUnderlay such as high elasticity, not subsidence as common floor underlay (white foam, silver foam) do, absorbing unevenness in base floor and completely eliminating creaking sounds while

Read More →